SERVICE
The Steps of Replacing Clean Paper and Modifying the speed of Clean paper motor in Ricoh High Speed Machine
Release time:
2019-08-07 10:49
Source:
Replace the cleaning paper steps:
1、4 screws removed from the front plastic cover；
2、Remove two on the top and unplug the three lines；
3、The whole set of cleaning paper components is coming down；
4、Blue plastic fixed bearing on both sides, 2 screws unloaded；
5、Turn the blue bearing down and pull it out ；
6、cleaning paper components and the blue bearing were taken out, the entire cleaning paper came down ；
7、Replacement before loading back.
Modify the rotational speed of cleaning paper motor：
1.Press 107C in turn, hold C for 8 seconds, and enter maintenance mode.
2.Input 1902#
3.The second modification has a normal value of 15, and the higher the value, the slower the speed.
Continuous printing volume is large, recommended to set to 8 to 10
Continuous printing volume is small, recommended to set to 12 to 15
If there is still a large consumption of cleaning paper after speed regulation, please check the motor problem of cleaning paper.
cleaning,paper,bearing
Contact Us
Hunan to Jian Headquarters
Headquarters address: 318 Fengshu Road, Changsha Economic Development Zone, Hunan Province
Guangzhou to Jane
Address: A4, Yard 13, Mupi West Road, Tianhe District, Guangzhou
To Jane Zhiyin
Address: 318 Fengshu Road, Economic Development Zone, Changsha City, Hunan Province
To Jane Yin Sicai
Address: Building 5, No.3 Kechuang 3rd Street, Beijing Economic and Technological Development Zone
Guizhou to Heng
Address: 777 Kexin South Road, Shavin Science and Technology Park, Guiyang National High-tech Zone
Xiaohe Wisdom Office
Address: 211, Building C5, Town 58, Yuelu District, Changsha City, Hunan Province
Public Number
Copyright©2023 Hunan Zhijian Copier Remanufacturing Co., Ltd.
This site supports ipv4 ipv6.
3D Virtual Pavilion
Douyin Official Media
Flagship Micro Mall
WeChat Public Number
3D Virtual Pavilion
Douyin Official Media
Flagship Micro Mall
WeChat Public Number