Xerox 6550/7500/5065 color machine part code and related maintenance methods
Xerox copier common code table solution
1、DC131: Component control
2、10-319 The fuser sensor detects the abnormality of the corrected output differential line input
Solution: Enter DC131 input 744-351 set to 0
3、10-320 The fuser was detected the high temperature abnormality three times in succession
Solution: Enter DC131 input 744-350 set to 0
4、10-326 One of the fuser lamps is abnormally lit
Solution: Reinstall the fuser, check the lamp and thermistor, etc.
5、61-32X code
61-326 ROS Laser head Yellow(Y)abnormal
61-327 ROS Laser head Magenta(M)abnormal
61-328 ROS Laser head Cyan(C)abnormal
61-329 ROS Laser head Black(K)abnormal
6、075-210/075-211 Bypass lift abnormal
Solution: Replace the small white gear
7、 042-320 Yellow(Y)Drum motor abnormal
Solution:Check the motor rotation of DC330 (042-011), and check whether the drum rotation is abnormal
8、 042-321 Magenta(M)Drum motor abnormal,check whether the drum rotation is abnormal
9、 042-322 Cyan(C) Drum motor abnormal,check whether the drum rotation is abnormal
10、042-323 Black(K) Drum motor abnormal,check whether the drum rotation is abnormal,Check the motor rotation of DC330（042-008）
11、042-326 The transfer belt rotates abnormally
Solution: Reload the transfer belt and clean the sensor
Execute DC330 042-013
DC330 042-200
Then look at the counter to see if it will continuously jump 0, 2, 4, 6, .... If it can be normal
12、094-322 The secondary transfer roller rotates abnormally
Solution:①Execute DC330（094-005）to hear if the secondary transfer roller clutch has motion
②Firstly, turn off the front door, check if the transfer belt assembly is pushed into place, re-open the drum, fuser unit, and transfer belt assembly to re-advance.
13、071-101 Tray 1(Paper jam)
072-101 Tray 2(Paper jam)
073-101 Tray 3(Paper jam)
074-101 Tray 4(Paper jam)
075-100 Tray 5(bypass)(Paper jam)
14、091-411 Y drum Close to lifetime (replace the drum chip. Check and test chip sensor)
091-421 M drum Close to lifetime (replace the drum chip. Check and test chip sensor)
091-431 C drum Close to lifetime (replace the drum chip. Check and test chip sensor)
091-401 K drum Close to lifetime (replace the drum chip. Check and test chip sensor)
15、093-421 （Black）The toner is nearly used up
093-422 （Black2）The toner is nearly used up
093-423 （Yellow）The toner is nearly used up
093-424 （Magenta）The toner is nearly used up
093-425 （Cyan）The toner is nearly used up
16、093-600 762-312→0 Y Toner bin motor may be damaged
093-601 762-313→0 M Toner bin motor may be damaged
093-602 762-314→0 C Toner bin motor may be damaged
093-603 762-315→0 K Toner bin motor may be damaged
093-314 762-312→0 Y Toner bin motor may be damaged
093-315 762-313→0 M Toner bin motor may be damaged
093-316 762-314→0 C Toner bin motor may be damaged
093-317 762-315→0 K Toner bin motor may be damaged
*Xerox 6550/7500/5065 color machine adjustment displacement
Solution:749-367 Tray 1 up and down
749-378 Tray 1 up and down displacement on the reverse side
749-369 Tray 2 up and down
749-370 Tray 2 up and down displacement on the reverse side
749-371 Tray 3 up and down
749-372 Tray 3 up and down displacement on the reverse side
749-373 Tray 4 up and down
749-374 Tray 4 up and down displacement on the reverse side
749-381 Tray 5 up and down
749-382 Tray 5 up and down displacement on the reverse side
742-002 Bypass tray weight paper 1 left and right
749-381 Bypass tray weight paper 1 up and down
742-010 Bypass tray weight paper 1 left and right displacement on the reverse side
749-382 Bypass tray weight paper 1 up and down displacement on the reverse side
715-110 On the first side of the document feeder, the next large value is up
742--005 Tray 1-4 positioning left and right
17、124-374 Solution: Switch on and off first. If not, one color of carbon powder is used up
