Xerox 6550/7500/5065 Color Machine Part Code Maintenance
Xerox Copier Common Code Table Solution
1. DC131: Component control
2.10-319 Fuser Sensor detects abnormality of correction output difference line input
Solution: Enter DC131 and set 744-351 to 0.
3. The 10-320 fixer has detected abnormal high temperature for three consecutive times
Solution: Enter DC131 and set 744-350 to 0.
4. One of the tubes of the 10-326 fuser is abnormally lit
Solution: reinstall the fuser, check the lamp, thermistor, etc.
5. 61-32X code
61-326 ROS laser head yellow (Y) abnormal
61-327 ROS laser head red (M) abnormal
61-328 ROS laser head cyan (C) abnormal
61-329 ROS Laser Head Black (K) Anomaly
6, 075-210/075-211 hand loose lifting abnormal
Solution: replace the small white gear
7.042-320 Yellow (Y) Drum Motor Abnormal
Solution: check the motor rotation DC330(042-011), check whether the drum rotation is abnormal
8, 042-321 red (M) drum motor is abnormal, check whether the drum set rotation is abnormal
9, 042-322 cyan (C) drum motor is abnormal, check whether the drum set rotation is abnormal
10.042-323 black (K) drum motor is abnormal, check whether the drum set rotates abnormally, and check the motor rotation DC330(042-008)
11.042-326 Abnormal rotation of transfer belt
Solution: Reinstall the transfer belt and clean the sensor.
Execute DC 330 042-013
DC330 042-200
Then look at the counter to see if it will continuously jump 0, 2, 4, 6,... it will be normal.
12.094-322 Abnormal rotation of secondary transfer roller
Solution: ① Execute DC330(094-005) to hear whether the clutch of the secondary transfer roller acts
② Turn off the machine first and open the front door, check whether the transfer belt assembly is pushed in place, and re-pull the drum, fuser assembly and transfer belt assembly to re-advance.
13.071-101 Tray 1 (Paper Jam)
072-101 Tray 2 (Paper jam)
073-101 Tray 3 (Paper jam)
074-101 Tray 4 (Paper jam)
075-100 Tray 5 (Hand Delivery) (Paper Card)
14.091-411 Y drum is close to life (replace the drum chip. Check the detection chip sensor)
091-421 M drum is close to life (replace the drum chip. Check the detection chip sensor)
091-431 C drum is close to life (replace the drum chip. Check the detection chip sensor)
091-401 K drum is close to life (replace the drum chip. Check the detection chip sensor)
15, 093-421 K1 (black) powder box is nearing use
093-422 K2 (Black) Powder Box Nearly Used
093-423 Y (Yellow) Powder Box Nears to Run Out
093-424 M (red) cartridge nearing end of use
093-425 C (cyan) cartridge nearing end of use
16, 093-600 762-312 → 0 Y powder bin motor may be damaged
093-601 762-313 → 0 M powder bin motor may be damaged
093-602 762-314 → 0 C powder bin motor may be damaged
093-603 762-315 → 0 K powder bin motor may be damaged
093-314 762-312 → 0 Y powder bin motor may be damaged
093-315 762-313 → 0 M powder bin motor may be damaged
093-316 762-314 → 0 C Powder bin motor may be damaged
093-317 762-315 → 0 K powder bin motor may be damaged
* Xerox 6550/7500/5065 color machine to adjust the displacement
Solution: 749-367 First Paper Box Up and Down
749-378 Top and Bottom of First Carton
749-369 Second Carton Up and Down
749-370 Second Carton Reverse Side Up and Down
749-371 Third Paper Box Up and Down
749-372 Top and bottom on the reverse side of the third carton
749-373 Fourth Carton Up and Down
749-374 Fourth Paper Box Reverse Side Up and Down
749-381 Fifth Tray Up and Down
749-382 Fifth Carton Back Up and Down
742-002 Thick Paper 1 Hand-delivered
749-381 Thick Paper 1 Hand Send Up and Down
742-010 thick paper 1 reverse hand to send left and right
749-382 Thick Paper 1 Reverse Hand Send Up and Down
715-110 Transmitter First Face Up and Down Large Copy Up
742-005 1-4 carton positioning left and right
17.124-374 Solution: Turn on and off first. If not, one color toner is used up.
